Integriti SIFER Card Programmer and Enrolment Station Release Notes:

Integriti SIFER Card Programmer and Enrolment Station Release V1.6.0.00003
05/08/2016

SCP & Enrolment station are now multi-format by default, enabling reading and enrolment of non-SIFER cards (UID only).
Enrolment station and SCP now report as MIFARE_DESFIRE_EV1_CSN and return the type (SIFER-P, U or C) if they are badged with a SIFER card that is using a different encryption key to the one currently set in the station.
Added a feature which allows the SCP Software to tell if the hardware is currently using default Inner Range encryption.

If the SCP or Enrolment station gets a SIFER card with different encryption to the station it will no longer incorrectly treat the UID as a site code and card number.

Added support for displaying the remaining number of uses on "Limited Uses" type cards.
Added support for displaying if a card is a 'SET FEATURES' configuration card type.
Added display of hardware revision as text (e.g. 'Rev_D') rather than number.
Added console reporting of RFID system hardware faults.
Updated to support newer hardware revisions.
Added ability to read PicoPass CSN including HID iClass (on multi-format hardware). This only allows the UID to be read, iClass credentials are not supported.
Added refresh of supported formats at power on based on hardware type.

Fixed cases where watchdog could trip when processing Configuration cards. This could make some Feature cards not work reliably.

Added support for RS485 console, enabled automatically if the SIFER firmware running on the device doesn't match the SIFER product hardware. This allows recovery if wrong F/W is downloaded to the wrong product (ie: SCP firmware to SIFER reader hardware).
Added UID (sometimes called CSN) display for non-SIFER card types when presented at SCP. These cannot be programmed however.
Added support for 15693 ICode SLI cards (recognise and read UID only).